Hioki Super megohm SM7110 - Setting Judgment Sound

91
Setting Judgment Sound
6.1 Setting Judgment Sound
Select whether to use a judgment sound for the measurement results.
Procedure to display the settings screen: COMP key
1
Select the respective buzzer sounds for Hi judgment, IN judgment, and Lo judgment.
[OFF] (No sound, default setting), [TYPE1], [TYPE2], [TYPE3]
Selecting [TYPE1], [TYPE2], or [TYPE3] sounds the buzzer in a specic tone for
conrmation.
2
If [COMP BEEP] is set to any one of [TYPE1], [TYPE2], or [TYPE3], set the number of
ringing times.
1 to 5 times, continuous (Default setting: 1 time)
Press the F3 key [↓] or F4 key [↑] to change the number of times.
Press the F1 key [CONT] to use the continuous sound setting.
6
Judging Measured Value (Comparator Function)