90
2
If the upper limit and lower limit settings are set to [ON], set the numerical value.
Pressing the F4 key
[EDIT] enables the
numerical value to be
changed.
Settle
Cancel
Move to the next
digit (left or right)
Change the
numerical value
(up or down)
Numerical value can also be changed with the numeric keypad. See “Methods for changing
numerical values” (p. 28).
Settable range
The following ranges are applicable in common to all ranges.
Resistance value measurement mode 2.0000E+19
Ω
to 5.0000E+01
Ω
Current value measurement mode -1.99999E-03 A to 1.99999E-03 A
Surface resistivity measurement mode
2.0000E+21
Ω
to 5.0000E+03
Ω
Volume resistivity measurement mode
Liquid volume resistivity measurement mode
To Next Page
Loading...
