Hioki Super megohm SM7110 - Control by Using Commands; Remote State; Local State

138
Control by Using Commands
10.6 Control by Using Commands
For the description (communication message reference) of the communication commands and
queries, refer to the Communication Command Instruction Manual, which is included in the
accompanying CD.
Remote state
The instrument is placed in the remote state during the USB, RS-232C, or GP-IB communication,
displaying [RMT] on the setting screen.
All the operation keys are disabled except the LOCAL key.
When the instrument changes to the remote state while the menu settings screen is displayed, the
screen automatically switched to the measurement screen.
Local state
The following operation deactivates the remote control and enables the key operation.
• Press the LOCAL key.
• Turn o󰀨 the instrument and turn it on again.
• Send the command
:SYSTem:LOCal
to the instrument via USB, RS-232C, or GP-IB.
• Send the command
GTL
from GP-IB via the instrument.