EasyManua.ls Logo

Hioki Super megohm SM7110 - Function specifications

Hioki Super megohm SM7110
194 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
139
11
Specications
11.1 General Specications
Operating
environment
Indoors, Pollution Degree 2, altitude up to 2000 m (6562 ft.)
Operating
temperature and
humidity
Temperature 0°C to 40°C (32°F to 104°F)
Humidity 80% RH or less (no condensation)
Storage temperature
and humidity
Temperature -10°C to 50°C (14°F to 122°F)
Humidity 80% RH or less (no condensation)
Standards
Safety EN61010
EMC EN61326 Class A
Dielectric strength 4000 V AC (current sensitivity: 10 mA)
Between bundle of power terminals and each of protective ground, interface, and
measurement terminal
Power Commercial power
Rated supply voltage 100 V AC to 240 V AC
(A supply voltage can uctuate from the rated supply
voltage within a band of plus or minus 10%.)
Rated supply frequency 50 Hz / 60 Hz
Anticipated transient overvoltage 2500 V
Maximum rated power 45 VA
Interface USB, RS-232C, GP-IB
Dimensions Approx. 330W × 80H × 450D mm (12.99"W × 3.15"H × 17.72"D) (excluding protrusions)
Mass Approx. 5.9 kg (208.1 oz.)
Product warranty
period
3 years
Connector, cable, etc.: Not covered by the warranty
Accessories See “Verifying Package Contents” (p. 2).
Options See “Options” (p. 3).
11 Specications
11
Specications

Table of Contents

Related product manuals