108
Checking Instrument Information
Setting Screen display Default setting
Reference
SYS
Key operation sound KEY CLICK ON p. 99
Key lock KEY LOCK OFF p. 100
Memory function MEMORY OFF p. 101
Voltage monitor check
Setting V MONI CHECK OFF
p. 103
Set value – ±20%
Double action DOUBLE ACTION ON p. 104
LCD contrast LCD CONTRAST 50% p. 104
LCD brightness BACKLIGHT 80% p. 105
Power frequency
POWER
FREQUENCY
AUTO (automatically
detects either 50 Hz or
60 Hz)
p. 105
I/O
Trigger logic setting TRIG EDGE ON p. 125
Trigger lter
Function TRIG FILTER OFF
p. 126
Time – 1 ms
GO-signal outputting logic level C.CHK / V.VHK GO NORMAL p. 127
EOM output timing
Mode EOM MODE HOLD
p. 128
Time – 1 ms
Output signal setting – NPN (switch on rear) p. 110
IF
Communication Interface INTERFACE RS-232C p. 129
RS-232C communication speed SPEED 9600 bps p. 133
GP-IB address ADDRESS 1
p. 134
GP-IB delimiter DELIMITER LF
USB mode USB MODE COMM p. 130
Data output function DATA OUT OFF p. 136
Communication monitor function CMD MONITOR OFF p. 137
8.10 Checking Instrument Information
You can check the following information:
• Model name of the product
• Version number of the main CPU
• Version number of the sub CPU
• Version number of the power supply CPU
• Version number of the CPLD
• Serial number
Procedure to display the setting screen: (Measurement screen) MENU key >
[INFO] tab
To Next Page
Loading...
