Hioki Super megohm SM7110 - Page 57

51
Reducing Variation in Measured Values (Average Function)
3
If [HOLD] is selected, set the average frequency.
2 to 255 times (default setting: 2 times)
Pressing the F4 key
[EDIT] enables the
numerical value to be
changed.
Settle
Cancel
Move to the next
digit (left or right)
Change the
numerical value
(up or down)
Numerical value can also be changed with the numeric keypad. See “Methods for changing
numerical values” (p. 28).
4
Applied Measurement