10
Operating Precautions
Installing the instrument
To prevent overheating, be sure to leave the specied clearances around the instrument.
• Install with the bottom surface facing downward.
• Vents must not be obstructed.
10 mm or more
Rear
50 mm or more50 mm or more
15 mm or more
“Extending and retracting the stands” (p. 20)
Handling the instrument
DANGER
To avoid electric shock, do not remove the instrument’s case. The internal
components of the instrument carry high voltages and may become very hot
during operation.
CAUTION
To avoid damage to the instrument, protect it from physical shock when transporting
and handling. Be especially careful to avoid physical shock from dropping.
This instrument may cause interference if used in residential areas. Such use must be avoided
unless the user takes special measures to reduce electromagnetic emissions to prevent
interference to the reception of radio and television broadcasts.
To Next Page
Loading...
