Hioki Super megohm SM7110 - Page 161

155
External I/O Specications
Functions of input
signal
TRIG Measurement starting input
Setting the input to the on state starts a measurement.
C_CHECK Contact check execution input
Setting the input to the on state executes a contact check.
V_CHECK Voltage check execution input
Setting the input to the on state executes a voltage check.
OPEN Open correction execution input
Setting the input to the on state executes an open correction.
START Measurement-voltage output starting signal
STOP
Measurement-voltage output stopping signal
CLEAR Value-and-judgment clearing input
When the On signal is inputted while the instrument does not perform
any measurement, the measured value and judgment result are
cleared.
After clearing them, the instrument will return a response indicating
that no measurement is performed in response to a measured-value
query of the communication commands.
INTERLOCK Interlock deactivating input
KEYLOCK Key lock input
11
Specications