Hioki Super megohm SM7110 - Page 67

61
Maintaining Measurement Accuracy (Self-Calibration Function)
2
If [ON] is selected, set the self-calibration interval.
1 s to 600 s (default setting: 600 s)
Pressing the F4 key
[EDIT] enables the
numerical value to be
changed.
Settle
Cancel
Move to the next
digit (left or right)
Change the
numerical value
(up or down)
Numerical value can also be changed with the numeric keypad. See “Methods for changing
numerical values” (p. 28).
4
Applied Measurement