HP 5120 SI Series User Manual

89
Number of users Real-time accounting interval (minute)
1000 or more 15 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
timer response-timeout (HWTACACS scheme view)
Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS scheme view
Default level
2: System level
Parameters
seconds: HWTACACS server response timeout period in seconds, in the range 1 to 300.
Description
Use the timer response-timeout command to set the HWTACACS server response timeout timer.
Use the undo timer command to restore the default.
By default, the HWTACACS server response timeout time is 5 seconds.
HWTACACS is based on TCP. If the server response timeout timer or the TCP timeout timer times out, the
device will be disconnected from the HWTACACS server.
Related commands: display hwtacacs.
Examples
# Set the HWTACACS server response timeout timer to 30 seconds for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer response-timeout 30
user-name-format (HWTACACS scheme view)
Syntax
user-name-format { keep-original | with-domain | without-domain }
View
HWTACACS scheme view

HP 5120 SI Series Specifications

General

Operating Temperature	0°C to 45°C
Uplink Ports	4 x SFP
MAC Address Table Size	16384 entries
Routing Protocol	RIP, RIPng
Management	CLI, Web-based GUI, SNMP
Form Factor	1U
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (noncondensing)