HP 5120 SI Series

355
<Sysname> display ike peer
---------------------------
IKE Peer: aaa
exchange mode: main on phase 1
peer id type: ip
peer ip address: 0.0.0.0 ~ 255.255.255.255
local ip address:
peer name:
nat traversal: disable
dpd:
---------------------------
Table 56 Output description
Field Descri
p
tion
exchange mode IKE negotiation mode in phase 1
pre-shared-key Pre-shared key used in phase 1
peer id type ID type used in phase 1
peer ip address IP address of the remote security gateway
local ip address IP address of the local security gateway
peer name Name of the remote security gateway
nat traversal Whether NAT traversal is enabled
dpd Name of the peer DPD detector
display ike proposal
Syntax
display ike proposal [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ike proposal command to view the settings of all IKE proposals.