HP 5120 SI Series

36
Default level
3: Manage level
Parameters
ftp: Authorizes the user to use the FTP service. The user can use the root directory of the FTP server by
default.
lan-access: Authorizes the user to use the LAN access service. Such users are mainly Ethernet users, for
example, 802.1X users.
ssh: Authorizes the user to use the SSH service.
telnet: Authorizes the user to use the Telnet service.
terminal: Authorizes the user to use the terminal service, allowing the user to login from the console port.
portal: Authorizes the user to use the portal service.
web: Authorizes the user to use the Web service.
Description
Use the service-type command to specify the service types that a user can use.
Use the undo service-type command to delete one or all service types configured for a user.
By default, a user is authorized with no service.
Examples
# Authorize user user1 to use the Telnet service.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] service-type telnet
state(local user view)
Syntax
state { active | block }
undo state
View
ISP domain view, local user view
Default level
2: System level
Parameters
active: Places the local user in the active state to allow the local user to request network services.
block: Places the local user in the blocked state to prevent the local user from requesting network services.
Description
Use the state command to set the status of a local user.
Use the undo state command to restore the default.
By default, a local user is in the active state.