HP 5120 SI Series

230
Examples
# Configure the name of the organization to which an entity belongs as test-lab.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] organization test-lab
organization-unit
Syntax
organization-unit org-unit-name
undo organization-unit
View
PKI entity view
Default level
2: System level
Parameters
org-unit-name: Specifies an organization unit name, a case-insensitive string of 1 to 31 characters. No
comma can be included.
Description
Use the organization-unit command to specify the organization unit to which this entity belongs.
Use the undo organization-unit command to remove the configuration.
By default, no organization unit name is specified for an entity.
Examples
# Configure the name of the organization unit to which an entity belongs as group1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] organization-unit group1
pki certificate access-control-policy
Syntax
pki certificate access-control-policy policy-name
undo pki certificate access-control-policy { policy-name | all }
View
System view
Default level
2: System level
Parameters
policy-name: Specifies a name for the certificate attribute-based access control policy, a case-insensitive
string of 1 to 16 characters. It cannot be a, al, or all.
all: Specifies all certificate attribute-based access control policies.