HP 5120 SI Series

365
• Authentication algorithm HMAC-SHA1
• Authentication method Pre-shared key
• DH group MODP_1024
• SA lifetime 86400 seconds
Related commands: display ike proposal.
Examples
# Create IKE proposal 10 and enter IKE proposal view.
<Sysname> system-view
[Sysname] ike proposal 10
[Sysname-ike-proposal-10]
ike sa keepalive-timer interval
Syntax
ike sa keepalive-timer interval seconds
undo ike sa keepalive-timer interval
View
System view
Default level
2: System level
Parameters
seconds: Transmission interval of ISAKMP SA keepalives in seconds, in the range 20 to 28,800.
Description
Use the ike sa keepalive-timer interval command to set the ISAKMP SA keepalive interval.
Use the undo ike sa keepalive-timer interval command to disable the ISAKMP SA keepalive transmission
function.
By default, no keepalive packet is sent.
The keepalive interval configured at the local end must be shorter than the keepalive timeout configured
at the remote end.
Related commands: ike sa keepalive-timer timeout.
Examples
# Set the keepalive interval to 200 seconds.
<Sysname> system-view
[Sysname] ike sa keepalive-timer interval 200
ike sa keepalive-timer timeout
Syntax
ike sa keepalive-timer timeout seconds
undo ike sa keepalive-timer timeout