135
Table 14 Output description
Field Descri
tion
Portal configuration of interface Portal configuration on the interface
IPv4 IPv4 portal configuration
IPv6 IPv6 portal configuration
Status
Status of the portal authentication on the interface:
• Portal disabled—Portal authentication is disabled.
• Portal enabled—Portal authentication is enabled but is not functioning.
• Portal running—Portal authentication is functioning.
Portal server Portal server referenced by the interface
Authentication type Authentication mode enabled on the interface
Authentication domain Mandatory authentication domain of the interface
Authentication network Information of the portal authentication subnet
Source IP IP address of the portal authentication source subnet
Mask Subnet mask of the IP address of the portal authentication subnet
Prefix length Prefix length of the IPv6 address of the portal authentication subnet
display portal local-server
Syntax
display portal local-server [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display portal local-server command to display configuration information about the local portal
server, including the supported protocol type, and the referenced SSL server policy.
Related commands: portal local-server.
Examples
# Display configuration information about the local portal server.
To Next Page
Loading...
Need help?
General