HP 5120 SI Series

183
Default level
2: System level
Parameters
user-name name: Specifies a user by the name, which is a string of 1 to 80 characters.
ip ipv4-address: IPv4 address of a user.
ipv6 ipv6-address: IPv6 address of a user.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display password-control blacklist command to display information about users blacklisted due
to authentication failure.
With no arguments provided, this command displays information about all users in the blacklist.
Examples
# Display information about users blacklisted due to authentication failure.
<Sysname> display password-control blacklist
Username: test
IP: 192.168.44.1 Login failed times: 1 Lock flag: unlock
Total 1 blacklist item(s) matched. 1 listed.
Table 25 Output description
Field Description
Username Username of the user
IP IP address of the user
Login failed times Number of login failures
Lock flag
Whether the user is prohibited from logging in:
• unlock—Not prohibited
• lock—Prohibited, temporarily or permanently,
depending on the password-control login-attempt
command.
password
Syntax
password
undo password