HP 5120 SI Series

201
Description
Use the habp client vlan command to specify the VLAN to which the HABP client belongs. HABP packets
will be transmitted within the VLAN.
Use the undo habp client vlan command to restore the default.
By default, an HABP client belongs to VLAN 1.
Examples
# Specify the HABP client to belong to VLAN 2.
<Sysname> system-view
[Sysname] habp client vlan 2
habp enable
Syntax
habp enable
undo habp enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the habp enable command to enable HABP.
Use the undo habp enable command to disable HABP.
By default, HABP is enabled.
Examples
# Enable HABP.
<Sysname> system-view
[Sysname] habp enable
habp server vlan
Syntax
habp server vlan vlan-id
undo habp server
View
System view
Default level
2: System level