HP 5120 SI Series User Manual

139
Field Descri
p
tion
ACK_AUTH
Authentication acknowledgment message the access device sends to the
portal server
REQ_LOGOUT Logout request message the portal server sends to the access device
ACK_LOGOUT Logout acknowledgment message the access device sends to the portal server
AFF_ACK_AUTH
Affirmation message the portal server sends to the access device after
receiving an authentication acknowledgement message
NTF_LOGOUT Forced logout notification message the access device sends to the portal server
REQ_INFO Information request message
ACK_INFO Information acknowledgment message
NTF_USERDISCOVER
User discovery notification message the portal server sends to the access
device
NTF_USERIPCHANGE
User IP change notification message the access device sends to the portal
server
AFF_NTF_USERIPCHANGE
User IP change success notification message the portal server sends to the
access device
ACK_NTF_LOGOUT Forced logout acknowledgment message from the portal server
NTF_USERSYNC User synchronization packet the access device received from the portal server
ACK_NTF_USERSYNC
User synchronization acknowledgment packet the access device sent to the
portal server
NTF_CHALLENGE Challenge request the access device sent to the portal server
NTF_USER_NOTIFY
User information notification message the access device sent to the portal
server
AFF_NTF_USER_NOTIFY
NTF_USER_NOTIFY acknowledgment message the access device sent to the
portal server
display portal tcp-cheat statistics
Syntax
display portal tcp-cheat statistics [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.

HP 5120 SI Series Specifications

General

Operating Temperature	0°C to 45°C
Uplink Ports	4 x SFP
MAC Address Table Size	16384 entries
Routing Protocol	RIP, RIPng
Management	CLI, Web-based GUI, SNMP
Form Factor	1U
Jumbo Frame Support	Yes
Operating Humidity	10% to 90% (noncondensing)