203
Public key configuration commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
display public-key local public
Syntax
display public-key local { dsa | rsa } public [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
dsa: Specifies a DSA key pair.
rsa: Specifies an RSA key pair.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display public-key local public command to display the public key information of the local key
pairs.
Related commands: public-key local create.
Examples
# Display the public key information of the local RSA key pairs.
<Sysname> display public-key local rsa public
=====================================================
Time of Key pair created: 19:59:16 2011/01/25
Key name: HOST_KEY
Key type: RSA Encryption Key
=====================================================
Key code:
30819F300D06092A864886F70D010101050003818D0030818902818100BC4C392A97734A633BA0F1DB01F
84EB51228EC86ADE1DBA597E0D9066FDC4F04776CEA3610D2578341F5D049143656F1287502C06D39D39F
To Next Page
Loading...
