HP 5120 SI Series

224
Default level
1: Monitor level
Parameters
policy-name: Specifies a certificate attribute-based access control policy by its name, a string of 1 to 16
characters.
all: Specifies all certificate attribute-based access control policies.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display pki certificate access-control-policy command to display information about one or all
certificate attribute-based access control policies.
Examples
# Display information about the certificate attribute-based access control policy named mypolicy.
<Sysname> display pki certificate access-control-policy mypolicy
access-control-policy name: mypolicy
rule 1 deny mygroup1
rule 2 permit mygroup2
Table 31 Output description
Field Description
access-control-policy
Name of the certificate attribute-based access control
policy
rule number Number of the access control rule
display pki certificate attribute-group
Syntax
display pki certificate attribute-group { group-name | all } [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-name: Specifies a certificate attribute group by its name, a string of 1 to 16 characters.
all: Specifies all certificate attribute groups.