1
AAA configuration commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
General AAA configuration commands
aaa nas-id profile
Syntax
aaa nas-id profile profile-name
undo aaa nas-id profile profile-name
View
System view
Default level
2: System level
Parameters
profile-name: Name of the NAS ID profile, a case-insensitive string of 1 to 16 characters.
Description
Use the aaa nas-id profile command to create a NAS ID profile and enter its view. A NAS ID profile
maintains the bindings between NAS IDs and VLANs.
Use the undo aaa nas-id profile command to remove a NAS ID profile.
Related commands: nas-id bind vlan.
Examples
# Create a NAS ID profile named aaa.
<Sysname> system-view
[Sysname] aaa nas-id profile aaa
[Sysname-nas-id-prof-aaa]
access-limit enable
Syntax
access-limit enable max-user-number
undo access-limit enable
View
ISP domain view
To Next Page
Loading...
Need help?
General