7
Examples
# Configure ISP domain test to use local accounting for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal local
# Configure ISP domain test to use RADIUS scheme rd for accounting on portal users and use local
accounting as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] accounting portal radius-scheme rd local
authentication default
Syntax
authentication default { hwtacacs-scheme hwtacacs-scheme-name [ local ] | local | none |
radius-scheme radius-scheme-name [ local ] }
undo authentication default
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, which is a
string of 1 to 32 characters.
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which is a string of 1 to 32
characters.
Description
Use the authentication default command to configure the default authentication method for an ISP
domain.
Use the undo authentication default command to restore the default.
By default, the default authentication method of an ISP domain is local.
The specified RADIUS or HWTACACS scheme must have been configured.
The default authentication method will be used for all users for whom no specific authentication methods
are configured.
Related commands: local-user, hwtacacs scheme, and radius scheme.
Examples
# Configure the default authentication method for ISP domain test to use RADIUS authentication scheme
rd and use local authentication as the backup.
<Sysname> system-view
To Next Page
Loading...
Need help?
General