HP 5120 SI Series

168
Table 22 Output description
Field Descri
p
tion
MAC ADDR Secure MAC address
VLAN ID ID of the VLAN to which the port belongs
STATE
Type of the MAC address added. "Security" means it is a secure MAC
address.
PORT INDEX Port to which the secure MAC address belongs
AGING TIME(s)
Period of time before the secure MAC address ages out. Currently, this
field displays "NOAGED" for both static and stickly secure MAC
addresses. For the setting of the sticky MAC aging timer, check the
"AutoLearn aging time" field in the output of the display port-security
command.
x mac address(es) found Number of secure MAC addresses stored
port-security authorization ignore
Syntax
port-security authorization ignore
undo port-security authorization ignore
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use the port-security authorization ignore command to configure a port to ignore the authorization
information from the RADIUS server.
Use the undo port-security authorization ignore command to restore the default.
By default, a port uses the authorization information from the RADIUS server.
After a user passes RADIUS authentication, the RADIUS server performs authorization based on the
authorization attributes configured for the user's account. For example, it may assign a VLAN.
Related commands: display port-security.
Examples
# Configure port GigabitEthernet 1/0/1 to ignore the authorization information from the RADIUS server.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] port-security authorization ignore