HP 5120 SI Series User Manual

254
SFTP configuration commands
The switch supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for features,
commands, and parameters might differ in FIPS mode and non-FIPS mode. For more information about
FIPS mode, see Security Configuration Guide.
SFTP server configuration commands
sftp server enable
Syntax
sftp server enable
undo sftp server enable
View
System view
Default level
3: Manage level
Parameters
None
Description
Use the sftp server enable command to enable SFTP server.
Use the undo sftp server enable command to disable SFTP server.
By default, SFTP server is disabled.
Related commands: display ssh server.
Examples
# Enable SFTP server.
<Sysname> system-view
[Sysname] sftp server enable
sftp server idle-timeout
Syntax
sftp server idle-timeout time-out-value
undo sftp server idle-timeout
View
System view
Default level
3: Manage level

HP 5120 SI Series Specifications

General

Brand	HP
Model	5120 SI Series
Category	Switch
Language	English