244
Default level
3: Manage level
Parameters
None
Description
Use the ssh server enable command to enable the SSH server function.
Use the undo ssh server enable command to disable the SSH server function.
By default, SSH server is disabled.
Examples
# Enable SSH server.
<Sysname> system-view
[Sysname] ssh server enable
ssh server rekey-interval
Syntax
ssh server rekey-interval hours
undo ssh server rekey-interval
View
System view
Default level
3: Manage level
Parameters
hours: Server key pair update interval in hours, in the range 1 to 24.
Description
Use the ssh server rekey-interval command to set the interval for updating the RSA server key.
Use the undo ssh server rekey-interval command to restore the default.
By default, the update interval of the RSA server key is 0. That is, the RSA server key is not updated.
This command is only available to SSH users using SSH1 client software.
The system does not update any DSA key pair periodically.
This command is not supported in FIPS mode.
Related commands: display ssh server.
Examples
# Set the RSA server key pair update interval to 3 hours.
<Sysname> system-view
[Sysname] ssh server rekey-interval 3
To Next Page
Loading...
Need help?
General