330
Field Descri
tion
authentication has failed Number of packets dropped due to authentication failure
wrong length Number of packets dropped due to wrong packet length
replay packet Number of packets replayed
packet too long Number of packets dropped due to excessive packet length
wrong SA Number of packets dropped due to improper SA
display ipsec tunnel
Syntax
display ipsec tunnel [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipsec tunnel command to display information about IPsec tunnels.
Examples
# Display information about IPsec tunnels.
<Sysname> display ipsec tunnel
total tunnel : 2
------------------------------------------------
connection id: 3
perfect forward secrecy:
SA's SPI:
inbound: 187199087 (0xb286e6f) [ESP]
outbound: 3562274487 (0xd453feb7) [ESP]
tunnel:
local address: 44.44.44.44
remote address : 44.44.44.55
flow:
sour addr : 44.44.44.0/255.255.255.0 port: 0 protocol : IP
dest addr : 44.44.44.0/255.255.255.0 port: 0 protocol : IP
current Encrypt-card: None
To Next Page
Loading...
Need help?
General