HP 5120 SI Series

134
display portal interface
Syntax
display portal interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display portal interface command to display the portal configuration of an interface.
Examples
# Display the portal configuration for interface VLAN-interface 2.
<Sysname> display portal interface vlan-interface 2
Portal configuration of Vlan-interface2
IPv4:
Status: Portal running
Portal server: servername
Portal backup-group: 1
Authentication type: Layer3
Authentication domain: my-domain
Authentication network:
Source IP: 1.1.1.1 Mask : 255.255.0.0
Portal configuration of Vlan-interface2
IPv6:
Status: Portal running
Portal server: v6pt
Portal backup-group: None
Authentication type: Direct
Authentication domain:
Authentication network:
Source IP: 4::4 Prefix length: 128