HP 5120 SI Series

354
Related commands: ike dpd.
Examples
# Display information about all DPD detectors.
<Sysname> display ike dpd
---------------------------
IKE dpd: dpd1
references: 1
interval-time: 10
time_out: 5
---------------------------
Table 55 Output description
Field Descri
p
tion
references Number of IKE peers that use the DPD detector
Interval-time DPD query trigging interval in seconds
time_out DPD packet retransmission interval in seconds
display ike peer
Syntax
display ike peer [ peer-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
peer-name: Name of the IKE peer, a string of 1 to 32 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ike peer command to display information about IKE peers.
If you do not specify any parameters, the command displays information about all IKE peers.
Related commands: ike peer.
Examples
# Display information about all IKE peers.