HP 5120 SI Series User Manual

371
Parameters
proposal-number&<1-6>: Sequence number of the IKE proposal for the IKE peer to reference, in the
range 1 to 65535. &<1-6> means that you can specify the proposal-number argument for up to six times.
An IKE proposal with a smaller sequence number has a higher priority.
Description
Use the proposal command to specify the IKE proposals for the IKE peer to reference.
Use the undo proposal command to remove one or all IKE proposals referenced by the IKE peer.
By default, an IKE peer references no IKE proposals and, when initiating IKE negotiation, it uses the IKE
proposals configured in system view.
In the IKE negotiation phase 1, the local peer uses the IKE proposals specified for it, if any.
An IKE peer can reference up to six IKE proposals.
The responder uses the IKE proposals configured in system view for negotiation.
Related commands: ike proposal and ike peer (system view).
Examples
# Configure IKE peer peer1 to reference IKE proposal 10.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] proposal 10
remote-address
Syntax
remote-address { hostname [ dynamic ] | low-ip-address [ high-ip-address ] }
undo remote-address
View
IKE peer view
Default level
2: System level
Parameters
hostname: Host name of the IPsec remote security gateway, a case-insensitive string of 1 to 255
characters. The host name uniquely identifies the remote IPsec peer and can be resolved to an IP address
by the DNS server.
dynamic: Specifies to use dynamic address resolution for the IPsec remote peer name. If you do not
provide this keyword, the local peer has the remote host name resolved only once after you configure the
remote host name.
low-ip-address: IP address of the IPsec remote security gateway. It is the lowest address in the address
range if you want to specify a range of addresses.
high-ip-address: Highest address in the address range if you want to specify a range of addresses.
Description
Use the remote-address command to configure the IP address of the IPsec remote security gateway.

HP 5120 SI Series Specifications

General

Brand	HP
Model	5120 SI Series
Category	Switch
Language	English