HP 5120 SI Series

144
[Sysname] interface vlan-interface 2
[Sysname–Vlan-interface2] portal auth-network 10.10.10.0 24
portal delete-user
Syntax
portal delete-user { ipv4-address | all | interface interface-type interface-number | ipv6 ipv6-address }
View
System view
Default level
2: System level
Parameters
ipv4-address: Logs off the portal user with the specified IPv4 address.
all: Logs off all portal users.
interface interface-type interface-number: Logs off all IPv4 and IPv6 portal users on the specified
interface.
ipv6 ipv6-address: Logs off the portal user with the specified IPv6 address.
Description
Use the portal delete-user command to log off portal users.
Related commands: display portal user.
Examples
# Log out the portal user whose IP address is 1.1.1.1.
<Sysname> system-view
[Sysname] portal delete-user 1.1.1.1
portal domain
Syntax
portal domain [ ipv6 ] domain-name
undo portal domain [ ipv6 ]
View
Interface view
Default level
2: System level
Parameters
ipv6: Specifies IPv6 portal users. If you do not specify the ipv6 keyword, the command is for IPv4 portal
users.
domain-name: Specifies an authentication domain name, a case-insensitive string of 1 to 24 characters.
The domain specified by this argument must already exist.