HP 5120 SI Series

252
algorithm by using the identity-key keyword to get the correct data for the local private key. By default,
the public key algorithm is DSA.
Examples
# Log in to remote SSH2.0 server 10.214.50.51, using the following algorithms:
• Preferred key exchange algorithm: DH-group1
• Preferred encryption algorithm from server to client: AES128
• Preferred HMAC algorithm from client to server: MD5
• Preferred HMAC algorithm from server to client: SHA1-96
<Sysname> ssh2 10.214.50.51 prefer-kex dh-group1 prefer-stoc-cipher aes128
prefer-ctos-hmac md5 prefer-stoc-hmac sha1-96
ssh2 ipv6
Syntax
In non-FIPS mode:
ssh2 ipv6 server [ port-number ] [ identity-key { dsa | rsa } | prefer-ctos-cipher { 3des | aes128 | des }
| prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1
| sha1-96 } ] *
In FIPS mode:
ssh2 ipv6 server [ port-number ] [ identity-key rsa | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 }
| prefer-stoc-hmac { sha1 | sha1-96 } ] *
View
User view
Default level
0: Visit level
Parameters
server: IPv6 address or host name of the server, a case-insensitive string of 1 to 46 characters.
port-number: Port number of the server, in the range 0 to 65535. The default is 22.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. The default is dsa.
prefer-ctos-cipher: Preferred encryption algorithm from client to server, defaulted to aes128.
• 3des: Encryption algorithm 3des-cbc.
• aes128: Encryption algorithm aes128-cbc.
• aes256: Encryption algorithm aes256-cbc.
• des: Encryption algorithm des-cbc.
prefer-ctos-hmac: Preferred HMAC algorithm from client to server, defaulted to sha1-96.
• md5: HMAC algorithm hmac-md5.
• md5-96: HMAC algorithm hmac-md5-96.
• sha1: HMAC algorithm hmac-sha1.
• sha1-96: HMAC algorithm hmac-sha1-96.