43
Field Description
NAS-IP address Source IP address for outgoing RADIUS packets
Attribute 25 Interprets RADIUS attribute 25 as the CAR parameters.
display radius statistics
Syntax
display radius statistics [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
slot slot-number: Specifies the member number of the device in the IRF virtual device, which you can
display with the display irf command. The value range for the slot-number argument depends on the
number of members and numbering conditions in the current IRF virtual device. If no IRF virtual device
exists, the slot-number argument is the current device number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display radius statistics command to display statistics about RADIUS packets.
Related commands: radius scheme.
Examples
# Display statistics about RADIUS packets on slot 1.
<Sysname> display radius statistics slot 1
Slot 1:state statistic(total=1048):
DEAD = 1048 AuthProc = 0 AuthSucc = 0
AcctStart = 0 RLTSend = 0 RLTWait = 0
AcctStop = 0 OnLine = 0 Stop = 0
StateErr = 0
Received and Sent packets statistic:
Sent PKT total = 1547
Received PKT total = 23
Resend Times Resend total
1 508
2 508
To Next Page
Loading...
