313
System-guard configuration commands
display system-guard
Syntax
display system-guard [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display system-guard command to display system-guard configuration.
Examples
# Display system-guard configuration.
<Sysname> display system-guard
system-guard detect-threshold: 300pps
system-guard aging-time : 60s
system-guard rate-limit :
queue0 360 queue1 360 queue2 360 queue3 360
queue4 1500 queue5 360 queue6 360 queue7 360
Table 46 Output description
Field Descri
tion
system-guard detect-threshold Rate threshold at which system-guard determines a port is under an attack
system-guard aging-time
Aging time for system-guard assigned ACLs and system-guard disabled
ports
system-guard rate-limit Rate limit set for packet queues
To Next Page
Loading...
Need help?
General