HP 5120 SI Series

194
Total 1 blacklist item(s) matched. 1 listed.
After three minutes, the user is removed from the blacklist and can log in again.
password-control password update interval
Syntax
password-control password update interval interval
undo password-control password update interval
View
System view
Default level
2: System level
Parameters
interval: Minimum password update interval, in the range 0 to 168, in hours. 0 means no requirements
for password update interval.
Description
Use the password-control password update interval command to set the minimum password update
interval—the minimum interval at which users can change their passwords.
Use the undo password-control password update interval command to restore the default.
By default, the minimum password update interval is 24 hours.
This function is not effective in the case that a user is prompted to change the password when the user
logs in for the first time or after the password is aged out.
Related commands: display password-control.
Examples
# Set the minimum password update interval to 36 hours.
<Sysname> system-view
[Sysname] password-control password update interval 36
password-control super aging
Syntax
password-control super aging aging-time
undo password-control super aging
View
System view
Default level
2: System level
Parameters
aging-time: Super password aging time in days, in the range 1 to 365.