361
exchange-mode
Syntax
exchange-mode main
undo exchange-mode
View
IKE peer view
Default level
2: System level
Parameters
main: Main mode.
Description
Use the exchange-mode command to select an IKE negotiation mode.
Use the undo exchange-mode command to restore the default.
By default, main mode is used.
Related commands: id-type.
Examples
# Specify that IKE negotiation works in main mode.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] exchange-mode main
id-type
Syntax
id-type { ip | name | user-fqdn }
undo id-type
View
IKE peer view
Default level
2: System level
Parameters
ip: Uses an IP address as the ID during IKE negotiation.
name: Uses a FQDN name as the ID during IKE negotiation.
user-fqdn: Uses a user FQDN name as the ID during IKE negotiation.
Description
Use the id-type command to select the type of the ID for IKE negotiation.
Use the undo id-type command to restore the default.
By default, the ID type is IP address.
To Next Page
Loading...
Need help?
General