225
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display pki certificate attribute-group command to display information about one or all
certificate attribute groups.
Examples
# Display information about certificate attribute group mygroup.
<Sysname> display pki certificate attribute-group mygroup
attribute group name: mygroup
attribute 1 subject-name dn ctn abc
attribute 2 issuer-name fqdn nctn app
Table 32 Output description
Field Description
attribute group name Name of the certificate attribute group
attribute number Number of the attribute rule
subject-name Name of the certificate subject
dn DN of the entity
ctn Indicates the contain operations
abc Value of attribute 1
issuer-name Name of the certificate issuer
fqdn FQDN of the entity
nctn Indicates the not-contain operations
app Value of attribute 2
display pki crl domain
Syntax
display pki crl domain domain-name [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
domain-name: Specifies a PKI domain by its name, a string of 1 to 15 characters.
To Next Page
Loading...
