HP 5120 SI Series

87
stop-accounting-buffer enable (HWTACACS scheme view)
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
View
HWTACACS scheme view
Default level
2: System level
Parameters
None
Description
Use the stop-accounting-buffer enable command to enable the device to buffer stop-accounting requests
to which no responses are received.
Use the undo stop-accounting-buffer enable command to disable the buffering function.
By default, the device buffers stop-accounting requests to which no responses are received.
Stop-accounting requests affect the charge to users. A NAS must make its best effort to send every
stop-accounting request to the HWTACACS accounting servers. For each stop-accounting request
getting no response in the specified period of time, the NAS buffers and resends the packet until it
receives a response or the number of transmission attempts reaches the configured limit. In the latter case,
the NAS discards the packet.
Related commands: reset stop-accounting-buffer, hwtacacs scheme, and display
stop-accounting-buffer.
Examples
# In HWTACACS scheme hwt1, enable the device to buffer the stop-accounting requests getting no
responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
timer quiet (HWTACACS scheme view)
Syntax
timer quiet minutes
undo timer quiet
View
HWTACACS scheme view
Default level
2: System level