HP 5120 SI Series

267
sftp ipv6
Syntax
In non-FIPS mode:
sftp ipv6 server [ port-number ] [ identity-key { dsa | rsa } | prefer-ctos-cipher { 3des | aes128 | des }
| prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1
| sha1-96 } ] *
In FIPS mode:
sftp ipv6 server [ port-number ] [ identity-key rsa | prefer-ctos-cipher { aes128 | aes256 } |
prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 }
| prefer-stoc-hmac { sha1 | sha1-96 } ] *
View
User view
Default level
3: Manage level
Parameters
server: IPv6 address or host name of the server, a case-insensitive string of 1 to 46 characters.
port-number: Port number of the server, in the range 0 to 65535. The default is 22.
identity-key: Specifies the algorithm for publickey authentication, either dsa or rsa. The default is dsa.
prefer-ctos-cipher: Preferred encryption algorithm from client to server, defaulted to aes128.
• 3des: Encryption algorithm 3des-cbc.
• aes128: Encryption algorithm aes128-cbc.
• aes256: Encryption algorithm aes256-cbc.
• des: Encryption algorithm des-cbc.
prefer-ctos-hmac: Preferred HMAC algorithm from client to server, defaulted to sha1-96.
• md5: HMAC algorithm hmac-md5.
• md5-96: HMAC algorithm hmac-md5-96.
• sha1: HMAC algorithm hmac-sha1.
• sha1-96: HMAC algorithm hmac-sha1-96.
prefer-kex: Preferred key exchange algorithm, defaulted to dh-group-exchange in non-FIPS mode, and
dh-group14 in FIPS mode.
• dh-group-exchange: Key exchange algorithm diffie-hellman-group-exchange-sha1.
• dh-group1: Key exchange algorithm diffie-hellman-group1-sha1.
• dh-group14: Key exchange algorithm diffie-hellman-group14-sha1.
prefer-stoc-cipher: Preferred encryption algorithm from server to client, defaulted to aes128.
prefer-stoc-hmac: Preferred HMAC algorithm from server to client, defaulted to sha1-96.
Description
Use the sftp ipv6 command to establish a connection to a remote IPv6 SFTP server and enter SFTP client
view.