HP 5120 SI Series

138
Description
Use the display portal server statistics command to display portal server statistics on a specific interface
or all interfaces.
With the all keyword specified, the command displays portal server statistics by interface and therefore
statistics about a portal server referenced by more than one interface may be displayed repeatedly.
Examples
# Display portal server statistics on VLAN-interface 1.
<Sysname> display portal server statistics interface vlan-interface 1
---------------Interface: Vlan-interface 1----------------------
Invalid packets: 0
Pkt-Name Total Discard Checkerr
REQ_CHALLENGE 3 0 0
ACK_CHALLENGE 3 0 0
REQ_AUTH 3 0 0
ACK_AUTH 3 0 0
REQ_LOGOUT 1 0 0
ACK_LOGOUT 1 0 0
AFF_ACK_AUTH 3 0 0
NTF_LOGOUT 1 0 0
REQ_INFO 6 0 0
ACK_INFO 6 0 0
NTF_USERDISCOVER 0 0 0
NTF_USERIPCHANGE 0 0 0
AFF_NTF_USERIPCHANGE 0 0 0
ACK_NTF_LOGOUT 1 0 0
NTF_USERSYNC 2 0 0
ACK_NTF_USERSYNC 0 0 0
NTF_CHALLENGE 0 0 0
NTF_USER_NOTIFY 0 0 0
AFF_NTF_USER_NOTIFY 0 0 0
Table 17 Output description
Field Descri
p
tion
Interface Interface referencing the portal server
Invalid packets Number of invalid packets
Pkt-Name Packet type
Total Total number of packets
Discard Number of discarded packets
Checkerr Number of erroneous packets
REQ_CHALLENGE Challenge request message the portal server sends to the access device
ACK_CHALLENGE
Challenge acknowledgment message the access device sends to the portal
server
REQ_AUTH Authentication request message the portal server sends to the access device