HP 5120 SI Series

93
Field Description
Reauth Period Periodic re-authentication timer in seconds
Quiet Period Quiet timer in seconds
Quiet Period Timer is disabled
Status of the quiet timer. In this example, the quiet timer is
enabled.
Supp Timeout Client timeout timer in seconds
Server Timeout Server timeout timer in seconds
The maximal retransmitting times
Maximum number of attempts for sending an authentication
request to a client
EAD quick deploy configuration EAD fast deployment configuration
URL
Redirect URL for unauthenticated users using a web browser to
access the network
Free IP Freely accessible network segment
EAD timeout EAD rule timer in minutes
The maximum 802.1X user resource number
per slot
Maximum number of concurrent 802.1X user per card
Total current used 802.1X resource number Total number of online 802.1X users
GigabitEthernet1/0/1 is link-up
Status of the port. In this example, GigabitEthernet 1/0/1 is
up.
802.1X protocol is disabled Specifies whether 802.1X is enabled on the port
Handshake is disabled Specifies whether handshake is enabled on the port
Handshake secure is disabled Specifies whether handshake security is enabled on the port
802.1X unicast-trigger is disabled Specifies whether unicast trigger is enabled on the port.
Periodic reauthentication is disabled
Specifies whether periodic online user re-authentication is
enabled on the port
The port is an authenticator Role of the port
Authenticate Mode is Auto Authorization state of the port
Port Control Type is Mac-based Access control method of the port
802.1X Multicast-trigger is enabled
Specifies whether the 802.1X multicast-trigger function is
enabled
Mandatory authentication domain Mandatory authentication domain on the port
Guest VLAN
802.1X guest VLAN configured on the port. If no guest VLAN
is configured, NOT configured is displayed.
Auth-fail VLAN
Auth-Fail VLAN configured on the port. If no Auth-Fail VLAN is
configured, NOT configured is displayed.
Critical VLAN
802.1X critical VLAN configured on the port. If no 802.1X
critical VLAN is configured on the port, NOT configured is
displayed.