HP 5120 SI Series

321
If you specify the name policy-name option but leave the seq-number argument, the command displays
detailed information about the specified IPsec policy group.
Related commands: ipsec policy (system view).
Examples
# Display brief information about all IPsec policies.
<Sysname> display ipsec policy brief
IPsec-Policy-Name Mode acl ike-peer name Mapped Template
------------------------------------------------------------------------
aaa-100 manual
policy1-1 isakmp
IPsec-Policy-Name Mode acl Local-Address Remote-Address
------------------------------------------------------------------------
aaa-100 manual
Table 47 Output description
Field Descri
p
tion
IPsec-Policy-Name Name and sequence number of the IPsec policy separated by hyphen
Mode
Negotiation mode of the IPsec policy:
• manual—Manual mode
• isakmp—IKE negotiation mode
acl Access control list (ACL) referenced by the IPsec policy
ike-peer name IKE peer name
Local-Address IP address of the local end
Remote-Address IP address of the remote end
# Display detailed information about all IPsec policies.
<Sysname> display ipsec policy
===========================================
IPsec Policy Group: "aaa"
Interface:
===========================================
-----------------------------
IPsec policy name: "aaa"
sequence number: 100
mode: manual
-----------------------------
security data flow :
tunnel local address:
tunnel remote address:
proposal name:
inbound AH setting:
AH spi: