HP 5120 SI Series

72
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display hwtacacs command to display the configuration information or statistics of HWTACACS
schemes.
If no HWTACACS scheme is specified, the command will display the configuration information of all
HWTACACS schemes.
If no slot number is specified, the command will display the configuration information of the HWTACACS
scheme on the main processing unit.
If no IRF member ID is specified, the command will display the configuration information of the
HWTACACS schemes on all members of an IRF virtual device.
Related commands: hwtacacs scheme.
Examples
# Display configuration information about HWTACACS scheme gy.
<Sysname> display hwtacacs gy
HWTACACS scheme name : gy
Primary Authen Server:
IP: 10.1.1.2 Port: 49 State: Active
Encryption Key : ******
Secondary Authen Server:
IP: 20.1.1.2 Port: 49 State: Active
Encryption Key : ******
Primary Author Server:
IP: 10.1.1.3 Port: 49 State: Active
Encryption Key : ******
Secondary Author Server:
IP: 20.1.1.3 Port: 49 State: Active
Encryption Key : ******
Primary Account Server:
IP: 10.1.1.1 Port: 49 State: Active
Encryption Key : ******
Secondary Account Server:
IP: 20.1.1.1 Port: 49 State: Active
Encryption Key : ******
NAS IP address : Not configured
Authentication key : Not configured
Authorization key : Not configured
Accounting key : Not configured
Quiet interval(min) : 5
Realtime accounting interval(min) : 12
Response timeout interval(sec) : 5
Retransmission times of stop-accounting packet : 100
Username format : with-domain
Data flow unit : Byte