HP ProCurve 5400zl

Specify lename for the TFTP transfer.
■ copy crash-log tftp IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
■ copy crash-log usb FILENAME
Specify lename for the USB transfer.
■ copy flash tftp IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Option:
■ cv_out_flash < primary | secondary > -- Copy from primary/secondary flash.(p. 108)
■ copy flash tftp IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Option:
■ cv_out_flash < primary | secondary > -- Copy from primary/secondary flash.(p. 108)
■ copy flash usb FILENAME
Specify lename for the TFTP transfer.
Next Available Option:
■ cv_out_flash < primary | secondary > -- Copy from primary/secondary flash.(p. 108)
■ copy running-config tftp IP-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy running-config tftp IPV6-ADDR FILENAME
Specify lename for the TFTP transfer.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy running-config usb FILENAME
Specify lename for the USB transfer.
■ copy startup-config tftp IP-ADDR FILENAME
115© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide