■ copy crash-log SLOT-ID-RANGE xmodem
Use xmodem on the terminal as the data destination.
■ copy crash-log mm xmodem
Use xmodem on the terminal as the data destination.
■ copy crash-log xmodem
Use xmodem on the terminal as the data destination.
■ copy flash xmodem
Use xmodem on the terminal as the data destination.
Next Available Option:
■ cv_out_flash < primary | secondary > -- Copy from primary/secondary flash.(p. 108)
■ copy running-config xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy startup-config xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy event-log xmodem
Use xmodem on the terminal as the data destination.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
136© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide
To Next Page
Loading...
