HP ProCurve 5400zl

Display Hello packets sent/received.
ip
■ [no] debug ip
Display debug messages for IPv4.
Next Available Options:
■ forwarding -- Display IPv4 forwarding messages.(p. 153)
■ packet -- Display IPv4 packet messages.(p. 155)
■ fib -- Display IP Forwarding Information Base debug messages.(p. 153)
■ ospf -- Display all OSPF routing messages.(p. 155)
■ rip -- Display all RIP routing messages.(p. 156)
ipv6
■ [no] debug ipv6
Display debug messages for IPv6.
Next Available Options:
■ dhcpv6-client -- Display DHCPv6 client debug messages.(p. 152)
■ forwarding -- Display IPv6 forwarding messages.(p. 153)
■ nd -- Display debug messages for IPv6 neighbor discovery.(p. 155)
■ packet -- Display IPv6 packet messages.(p. 155)
lldp
■ [no] debug lldp
Display LLDP information.
loglevel
■ debug ssh < fatal | error | info | ... >
Supported Values:
■ fatal
■ error
■ info
■ verbose
■ debug
■ debug2
■ debug3
LSA
■ [no] debug ip ospf packet LSA
Display LSA packets sent/received.
lsa-generation
■ [no] debug ip ospf lsa-generation
154© 2009 Hewlett-Packard Development Company, L.P.
debugCommand Line Interface Reference Guide