HP ProCurve 5400zl User Manual

no specic MAC address lter on the port.
The default is no client limit.
o 'initialize' re-initialize authentication on the specied
ports. That is, 'initialize' blocks inbound and outbound
trafc and restarts the authentication process on the
specied ports that are congured with 'control auto' (see
the 'control' parameter, described above) and actively
operating as authenticators.
o 'reauthenticate' forces re-authentication (unless the
authenticator is in 'HELD' state).
o 'mac-addr' allows to specify which client needs to be forced
o 'clear-statistics' clears authenticator statistics
counters.
Next Available Options:
■ PORT-LIST -- Manage 802.1X on the device port(s). ([ethernet] PORT-LIST) (p. 43)
■ active -- Activate/deactivate 802.1X authenticator.(p. 27)
authorization
■ aaa authorization
Usage: [no] aaa authorization <commands> <radius>
Description: Congure authorization parameters on the switch.
Next Available Option:
■ commands -- Configure exec (shell) commands authorization. (p. 31)
auth-timeout
■ aaa port-access supplicant [ETHERNET] PORT-LIST auth-timeout < 1 to 300 >
Set the challenge reception timeout (default 30sec.).
Range: < 1 to 300 >
auth-vid
■ [no] aaa port-access authenticator [ETHERNET] PORT-LIST auth-vid
Congures VLAN where to move port after successful authentication (not congured
by default).
Next Available Option:
■ VLAN-ID -- Configures VLAN where to move port after successful authentication (not configured
by default). (VLAN-ID) (p. 54)
■ [no] aaa port-access mac-based [ETHERNET] PORT-LIST auth-vid
Congures VLAN where to move port after successful authentication (not congured
by default).
30© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English