HP ProCurve 5400zl User Manual

Usage: [no] aaa port-access <authenticator ... | supplicant ...
web-based ... | mac-based ...>
Description: Congure 802.1X (Port Based Network Access),
MAC address based network access,
or web authentication based network access
on the device. You can congure authenticator,
supplicant, MAC address based, or web authentication based
network access on the device or device ports by specifying
a corresponding keyword.
See 'aaa port-access authenticator help', 'aaa port-access
supplicant help', 'aaa port-access mac-based help', and
'aaa port-access web-based help' for further details on
authenticator, supplicant, MAC address based, and
web authentication based network access conguration.
Next Available Options:
■ gvrp-vlans -- Enable/disable the use of RADIUS-assigned dynamic (GVRP) VLANs(p. 34)
■ authenticator -- Configure 802(p. 28)
■ supplicant -- Manage 802 ([ethernet] PORT-LIST) (p. 51)
■ mac-based -- Configure MAC address based network authentication on the device or the
device's port(s)(p. 37)
■ web-based -- Configure web authentication based network authentication on the device or the
device's port(s)(p. 55)
■ PORT-LIST -- Manage general port security features on the device port(s). ([ethernet] PORT-LIST)
(p. 43)
PORT-LIST
■ [no] aaa port-access authenticator [ETHERNET] PORT-LIST
Manage 802.1X on the device port(s).
Next Available Options:
■ control < authorized | auto | unauthorized > -- Set the authenticator to Force Authorized, Force
Unauthorized or Auto state (default Auto). (NUMBER) (p. 32)
■ quiet-period < 0 to 65535 > -- Set the period of time the switch does not try to acquire a
supplicant (default 60 sec.). (NUMBER) (p. 47)
■ tx-period < 1 to 65535 > -- Set the period of time the switch waits until retransmission of EAPOL
PDU (default 30 sec.). (NUMBER) (p. 53)
■ supplicant-timeout < 1 to 300 > -- Set the supplicant response timeout on an EAP request
(default 30 sec.). (NUMBER) (p. 52)
■ server-timeout < 1 to 300 > -- Set the authentication server response timeout (default 30sec.).
(NUMBER) (p. 50)
■ max-requests < 1 to 10 > -- Set maximum number of times the switch retransmits authentication
requests (default 2). (NUMBER) (p. 39)
■ reauth-period < 0 to 9999999 > -- Set the re-authentication timeout (in seconds, default 0); set
to '0' to disable re-authentication. (NUMBER) (p. 47)
■ auth-vid -- Configures VLAN where to move port after successful authentication (not configured
by default).(p. 30)
■ unauth-vid -- Configures VLAN where to keep port while there is an unauthenticated client
connected (not configured by default).(p. 53)
■ unauth-period < 0 to 255 > -- Set period of time the switch waits for authentication before
moving the port to the VLAN for unauthenticated clients. (NUMBER) (p. 53)
43© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide

HP ProCurve 5400zl Specifications

General

Brand	HP
Model	ProCurve 5400zl
Category	Switch
Language	English