HP ProCurve 5400zl

secret
■ aaa port-access supplicant [ETHERNET] PORT-LIST identity IDENTITY secret
■ aaa port-access supplicant [ETHERNET] PORT-LIST secret
Trigger the command to ask user for a password for the supplicant to use.
server-timeout
■ aaa port-access authenticator [ETHERNET] PORT-LIST server-timeout < 1 to 300 >
Set the authentication server response timeout (default 30sec.).
Range: < 1 to 300 >
■ aaa port-access mac-based [ETHERNET] PORT-LIST server-timeout < 1 to 300 >
Set the authentication server response timeout (default 30 seconds).
Range: < 1 to 300 >
■ aaa port-access web-based [ETHERNET] PORT-LIST server-timeout < 1 to 300 >
Set the authentication server response timeout (default 30 seconds).
Range: < 1 to 300 >
ssh
■ aaa authentication ssh
Usage: aaa authentication ssh <enable|login>
<primary-method> [<backup-method>]
Description: Congure authentication mechanism used to control SSH
access to the switch.
Parameters:
o enable - Congure access to privileged mode.
o login - Congure login access.
o <primary-method> - Species the primary authentication
method for access control. Use <TAB>
or <?> after you specify enable or login
to get a list of all available
primary authentication methods.
o <backup-method> - Species an authentication method
to use, if the primary authentication
method is not able to check user's
credentials.
Use <TAB> or <?> after you specify the
primary authentication method to get a list
of all available backup methods.
Next Available Options:
■ enable -- Configure access to the privileged mode commands.(p. 33)
■ login -- Configure login access to the switch.(p. 36)
ssl-login
■ [no] aaa port-access web-based [ETHERNET] PORT-LIST ssl-login
Set whether to enable SSL login (https on port 443) (default disabled).
50© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide