Next Available Option:
■ secondary < none | authorized > -- Specify the backup authentication method for access
control.(p. 48)
primary_method
■ aaa authorization commands < radius | none >
Supported Values:
■ radius -- Use RADIUS protocol as the authorization method.
■ none -- No authorization (always succeeds).
privilege-mode
■ [no] aaa authentication login privilege-mode
Usage: [no] aaa authentication login privilege-mode
Description: Specify that switch respects the
authentication server's privilege level.
quiet-period
■ aaa port-access authenticator [ETHERNET] PORT-LIST quiet-period < 0 to 65535 >
Set the period of time the switch does not try to
acquire a supplicant (default 60 sec.).
Range: < 0 to 65535 >
■ aaa port-access mac-based [ETHERNET] PORT-LIST quiet-period < 1 to 65535 >
Set the period of time the switch does not try to authenticate (default 60 seconds).
Range: < 1 to 65535 >
■ aaa port-access web-based [ETHERNET] PORT-LIST quiet-period < 1 to 65535 >
Set the period of time the switch does not try to authenticate (default 60 seconds).
Range: < 1 to 65535 >
reauthenticate
■ aaa port-access authenticator [ETHERNET] PORT-LIST reauthenticate
Force re-authentication to happen.
■ aaa port-access mac-based [ETHERNET] PORT-LIST reauthenticate
Force re-authentication to happen.
■ aaa port-access web-based [ETHERNET] PORT-LIST reauthenticate
Force re-authentication to happen.
reauth-period
■ aaa port-access authenticator [ETHERNET] PORT-LIST reauth-period < 0 to 9999999 >
Set the re-authentication timeout (in seconds,
default 0); set to '0' to disable re-authentication.
47© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide
To Next Page
Loading...
