HP ProCurve 5400zl

to use, if the primary authentication
method is not able to check user's
credentials.
Use <TAB> or <?> after you specify the
primary authentication method to get a list
of all available backup methods.
Next Available Options:
■ enable -- Configure access to the privileged mode commands.(p. 33)
■ login -- Configure login access to the switch.(p. 36)
web-authvid
■ aaa port-access web-based [ETHERNET] PORT-LIST auth-vid VLAN-ID
Congures VLAN where to move port after successful authentication (not congured
by default).
web-based
■ aaa authentication web-based
Usage: aaa authentication web-based <primary-method> [<backup-method>]
Description: Congure authentication mechanism used to control web-based
port access to the switch.
Parameters:
o <primary-method> - Species the primary authentication
method for access control. Use <TAB>
or <?> after you specify enable or login
to get a list of all available
primary authentication methods.
o <backup-method> - Species an authentication method
to use, if the primary authentication
method is not able to check user's
credentials.
Use <TAB> or <?> after you specify the
primary authentication method to get a list
of all available backup methods.
Next Available Option:
■ primary < chap-radius | peap-mschapv2 > -- Specify the primary authentication method for
access control.(p. 44)
■ aaa port-access web-based
Usage: [no] aaa port-access web-based
[dhcp-addr <base address / mask> | dhcp-lease <5-25> |
ewa-server <ip-addr | host-name> [page-path]]
[no] aaa port-access web-based [ethernet] PORT-LIST
[client-limit <1-32> | client-moves | ssl-login |
redirect-url <URL> | quiet-period <1-65535> |
server-timeout <1-300> | max-requests <1-10> |
max-retries <1-10> | logoff-period <1-9999999> |
reauth-period <0-9999999> | auth-vid VLAN-ID |
unauth-vid VLAN-ID | reauthenticate]
55© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide